Dual lead push button panels
- From 2 to 20 buttons (standard
button panels are fitted with 1NO + 1NC contacts).
- On
request we can insert a mechanical block for matched buttons (for instance
this mechanical block can prevent an operator to push adventitiously the
buttons “up” and “down” at the same time).
- The rubber
sleeve can be fitted upward (as shown in the images, for hoist or crane)
or downward (for welding machines or machine tools, etc) so that it can be
used as a handle.
- Buttons
available in different colours: black, white, green, red, yellow, blue
(for button panels, 1000 series).
- On
request switches listed by UL to Canadian and U.S. safety standards are
available.
Single lead push button panels
- From
2 to 10 buttons (standard button panels are fitted with 1NO + 1NC contacts).
For all push button panels
Contacts:
- Under
every button we can fit up two blocks with 1NO + 1NC contacts
- With
the standard 1NO + 1NC contact block, we can fit a 2 impulse 1NO + 1NC
contact block (first block activated with the button half pressed, and
second block activated with the button full pressed).
We can replace every button with:
- Mushroom
shaped holding button (emergency) according to standard EN 418
- Pilot
light (available colours: yellow, red, green, blue)
- Two
positions key switch
- Three
positions lever commutator
- Two
positions lever switch
To learn more about our products contact us (our
technical office is at Your disposal) or see our on line catalogue (including
technical specifications and dimension) at www.stzsrl.it
S.T.Z. s.r.l. 23877 Paderno d’Adda (LC) Italy
Strada delle Brigole n° 2/A
Tel: ++39039514038 (English spoken) – Fax:
++39039514044
E-Mail: stz@stzsrl.it - Internet page: www.stzsrl.it